language
Ampoule Filling Production Line
The Ampoule SVP Injectable Liquid Filling Production Line includes Ultrasonic washing machine, Sterilizing tunnel, Ampoule filling and sealing machine. Its divided into washing zone, sterilizing zone, filling and sealing zone. This compact line can work together as well as independently. Compared with other manufacturers, our equipment has unique features, including overall dimension smaller, higher automation & stability, lower fault rate and maintenance cost, and etc.
Ampoule Filling Production Line
| Applicable specifications | 1-20ml B type ampoules which meets the standard of GB2637. |
| Maximum capacity | 7,000-10,000pcs/h |
| WFI consumption | 0.2-0.3Mpa 1.0 m3/h |
| Compressed air consumption | 0.4Mpa 50 m3/h |
| Electric capacity | CLQ114Vertical ultrasonic washing machine:15.7KW |
| RSM620/60 Sterilizing and drying machine 46KW, heating power: 38KW | |
| AGF12 Ampoule filling and sealing machine 2.6KW | |
| Dimensions | CLQ114Vertical ultrasonic washing machine:2500×2500×1300mm |
| RSM620/60 Sterilizing and drying machine:4280×1650×2400mm | |
| AGF12 Ampoule filling and sealing machine:3700×1700×1380 mm | |
| Weight | CLQ114Vertical ultrasonic washing machine:2600 Kg |
| RSM620/60 Sterilizing and drying machine:4200 Kg | |
| AGF12 Ampoule filling and sealing machine:2600 Kg |
Production Procedures
Ultrasonic washing
● It adopts washing technology of 2 water and 2 air on the outer wall and 3 water and 4 air on the inner wall.
● 6 groups of spraying needles have track washing, spray needles adopts full 316L stainless steel. Servo control system+ Guide sleeve and guide board give accurate position to the spray needle, effectively avoid needle damage caused by mismatch.
● WFI and compressed air is intermittent, reduce the consumption.
Sterilizing& Drying
●The washed bottles enter into sterilizing &drying machine slowly uniformly through mesh belt. Pass through preheating zone, high temperature sterilizing zone, cooling zone gradually.
●The moisture exhausting fan discharge the bottle vapor to outdoor, in high temperature zone, the bottles are sterilized about 5 minutes under 300-320℃. The cooling zone cools the sterilized vials, and finally reach to technological requirement.
●The whole drying and sterilizing process is operated under real time monitoring.
Filling& Sealing
● This machine adopts a transmission system of step-by-step with balcony structure.
● The machine automatically finishes the whole production process:
● Auger conveying---Front nitrogen charging (optional)---Solution filling---Rear nitrogen charging (optional)--- Preheating---Sealing---Counting---Finished products outputting.
18+ Years of Turnkey Projects in Pharma Machinery
We provided 1000s of pharm & med equip & turnkey projects
Shanghai IVEN Pharmatech Engineering Co., Ltd. was established in 2005, has four professional factories for pharmaceutical machinery, blood collection tube machinery, water treatment equipment and automatic packing & intelligent logistic system.We provide integrated engineering solution for worldwide pharmaceutical factory and medical factory in compliance with EU GMP / US FDA GMP , WHO GMP, PIC/S GMP principle etc…
-
Project engineering design
-
Turnkey projects for the pharmaceutical industry
-
GMP standards for pharma manufacturing
Fill out the form to contact us, We promise to respond to you quickly.
InquiryCompany Profile
IVEN Pharmatech Engineering is an international professional engineering company providing healthcare industry solutions.
We provide integrated engineering solution for worldwide pharmaceutical factory and medical factory in compliance with EU GMP / US FDA cGMP , WHO GMP, PIC/S GMP principle etc.
With decades years experiences in the pharmaceutical and medical industry, we dedicate to deliver the satisfactory tailor-made solutions for our worldwide customers, which include the advanced project design, high quality equipment, efficient process management, and entire-life full service.
Call Us or Fill the Form
-
Fax: +86-21-50760379
Contact: Charlene Liu
Office Address:NO.201, New Jinqiao Rd, Pudong, Shanghai, China
Contact US
Product Information
Quantity
Unit
Piece
Support order samples, customization, wholesale direct, and complete payment. If the product you look for does not have corresponding customized content, pls fill out the form below to contact us, and we will reply ASAP.